Wireless Home Security Alarm System Kit - 4.3 Inch Touch Screen Panel, DIY GSM WiFi Burglar Alarm with Mobile App - Works with Alexa & Google Assistant (No Monthly Fees, 2G+WiFi) for House, Apartment & Office Protection

*Download the Smartlife APP on your cellphone: Search the "Smart Life " on google store for Android, or app store for apple to download it. Or Scan the QR Code on user manual to download it. *When you connect WiFi(2.4GHz), please make sure your cellphone is also using the WiFi(better to close 2G/3G/4G signal on your cellphone first),download the Smartlife APP on your cellphone, register it with your e-mail or phone number--Open the App--Add Device--Add Manually--Sensors--Alarm(Wi-Fi)--Enter WiFi(2.4GHz) and enter the password and click next--Click confirm the indicator is blinking ra... and you will see Blink Quickly--Click Menu of alarm panel--Click WiFi--Click Smartlink configure--Click Blink Quickly on APP--connecting device--click "+"--Added successfully Done on APP--Done on Panel Care more on little child Pack with five window/door sensors. They are simple to pair and can be installed at various entrances to a door or window by 3M tape. if your little child wants to open the door to come out alone, you will notice this at once. Care more on older people Comes with SOS & Remote Control, arm or disarm the system by the remote control. If an emergency happen on the elderly, children or ladies , just press the SOS button on the panel or on the remote to trigger the system to let other family knows it. Pack with two PIR motion sensor The motion sensor covers a wide range, with a wide angle of 110 degrees. If any break-in is happened, you will be alerted by APP notifications and a loud alarm from the security panel. And it is friendly to your pets. Read more 1.Mounting Strip 2.Bracket 3.Installation screws x2 4.Battery receptacle 5.CR2450 3V lithium battery. 6.Motion detect lens 7.Light indicator inside. Blinks for 3 seconds after detector powers on. Lights up when there’s motion in the room. And blinks in case of low battery, please replace the battery soon. 8.Power on/off. Slide it to ON to power up the detector. 9.TEST & NORMAL switch. For effective walk testing, slide TEST/NORMAL switch to TEST.When walk testing is done, slide it to NORM to save battery power. In NORM mode, if the detector is triggered twice within 3 minutes, it enters sleeping state immediately. During this period, any movement detected does not generate an alarm. After no movement within the next 3 minutes, it goes back to working state again 1.Indicator. Lights up when door/window is opened. And blinks in case of low battery, please replace the battery soon. 2.Sensor 3.Open-Close magnet. Works with sensor to sense when a door or window is opened or closed. 4.Tamper switch. Tamper switch (small black lever underneath the bracket) will trigger an alarm notification If someone tampers the sensor and removes it from its installed location. 5.Battery receptacle. Contains one CR2032 3V lithium battery. 6.Mounting strips. Attaches sensor and magnet to a flat surface. Install Instruction Step by Step as below: Step 1: Power the alarm panel and turn on it: Open the package, plug the cable to the adapter, connect the adapter to the wall outlet, plug the usb cable to the panel to power it, turn on the panel by pressing the switch. Step 2: Download the Smartlife APP on your cellphone: Search the "Smart Life " on google store for Android, or app store for apple to download it. Or scan the QR Code on the user manual to download it. And then register it with your e-mail or your phone number. Step 3: Connect Wifi: When you connect WiFi(2.4GHz), please make sure your cellphone is also using the WiFi(better to close 2G/3G/4G signal on your cellphone first),download the Smartlife APP on your cellphone, register it with your e-mail or phone number--Open the App--Add Device--Add Manually--Sensors--Alarm(Wi-Fi)--Enter WiFi(2.4GHz) and enter the password and click next--Click confirm the indicator is blinking ra... and you will see Blink Quickly--Click Menu of alarm panel--Click WiFi--Click Smartlink configure--Click Blink Quickly on APP--connecting device--click "+"--Added successfully Done on APP--Done on Panel Step 4: Install the Wired siren: Plug the siren cable head into the panel. Put the siren on the wall next to the panel by screw or 3M adhesive. Done. Step 5: Install the PIR motion detector: take out the PIR motion detector base and screws in the package, use screw, mount the base on the upper wall conner which pointing at door and sitting room or important entry ways or hallways or stairwells, turn on the PIR motion detector(the switch is on the back) and put it on the base. Done. Step 6: Install the Door Window Sensor: put the adhesive on the back of the door window sensor, torn off the transparent insulating plastic sheet to make the battery working. Put the sensor on the door or on the window. Done. Step 7: Connect panel with Alexa & Google Assistant if you have in your home or office.